Jasmine Enterprises
Chennai, Tamil Nadu
GST No. 33AGGPR6038M1Z0
Call 08048603586 63% Response Rate
Send Enquiry
Resharpening Machines
We are offering a commendable range of Re-Sharpening Machine. Our professionals make sure that the vendors fabricate these products in compliance with international quality standards using optimum-grade raw-material. Moreover, we make these products available to the customers at industry-leading prices. To cater to the diversified needs of the clients, we offer these machines in varied specifications.
Drill Resharpening Machine
Get Best Quote
Rs 54,000 / UnitPrice on Request
| Material | Mild Steel |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Phase | Single Phase |
| Country of Origin | Made in India |
| Usage/Application | Industrial |
| Color | Blue and White |
| Surface Finish | Powder Coated |
Attention:
- Please DO NOT switch on the machine BEFORE
- (1)The diamond wheel screw (B3) is tightly screwed.
- (2)The side cover (B2) is properly closed.
- (3)The right knob (B3) is fully fastened.
- Incase of any hazard occurring, please make sure that the above measures are followed strictly.
- The machine has an autonatic Power-off device operator's safety. Power supply will be cut-off immediately when the cover is opened.
Patented Features:
- Double-bearing grinding unit(reduces wear).
- Drill tightened design with bearing device.
- Adjustable trimming angle.
Standard Accessories:
- ER Collets, 2.5mm-13mm(12pcs).
- CBN Diamond wheel #200x1 PCS(High Speed drill).
- 4mm, 5mm Hexagon(Hex.) wrench x 1 pc each.
Optional Accessories:
- SDC #400 Diamond wheel(carbide drill).
- CBN #400 Diamond wheel(??? 4mm, High Speed drill).
- ER Collets, 3.5mm-12.5mm(10pcs).
View Complete details
Yes! I am Interested
Request a call back
Cutting- Off Machine
Get Best Quote
Rs 1,75,000 / UnitPrice on Request
| Weight | 13.5kgs |
| Motor Speed | 600W / 6000rpm |
| Capacity | Max. 16 mm |
| Model Number | CM-316 |
| Dimension (L x W x H) | 340 x 210 x 210 mm |
| Power Suppy | AC 110 V /AC 220 V 50 / 60 HZ |
|
STANDARD ACCESSORIES |
|||
|
Power Wires |
1 Set |
||
|
Fuse |
2 Set |
||
|
Hex Wrench |
4mm/5mm/10mm one each |
||
|
Handle |
1 Set |
||
|
Diamond Wheel |
SDC80# 1Set |
||
|
|
|
||
|
OPTION ACCESSORIES |
|||
|
Diamond Wheel |
CBN80# |
||
View Complete details
Yes! I am Interested
Request a call back
End Mill Resharpening Machine
Get Best Quote
Rs 1,75,000 / UnitPrice on Request
| Usage/Application | Industrial |
| Weight | 17 kg |
| Power | AC 110V / AC 220 50 / 60 HZ |
| Country of Origin | Made in India |
| Model Number | GH-413 |
| Quality Assurance | 0.02mm |
| Dimensions (L x W x H) | 310x260x290 mm |
Caution:
- Determine the material of end mill before grinding. Please use SDC diamond wheel for carbide end mill; please use CBN diamond wheel for HSS end mill.
- Determine the flute of the end mill and use the proper collet holder; GH-413 is suitable for 2, 3, and 4 flute end mill.
- Aligning end mill is the most important among the steps, make sure to complete this step before grinding.
- This machine is guaranteed for one year under normal operation(expendable parts and wheels are exceptions), please inform the serial no. when the machine needs to be repaired.
- For end mill 4~5mm, be sure to use a very slight push motion while grinding the primary edge due the outer diameter of wheel is smaller.
- The motor cannot run continuously over 1 hour.
View Complete details
Yes! I am Interested
Request a call back
EXPLORE MORE CATEGORIES