Jasmine Enterprises

• Used for precision measurement,setting of angles & light machining.
• Accuracy for squareness,flatness and parallelism.
• Within 0.005mm upto 200L & 0.010mm upto 450L.
• Angle can be set within ±5 seconds.
• Centre distance between rollers is within 0.005mm.
• Made from high quality alloy wheel.
• Hardness -60 ± 2Rc & tempered.
• Magnetic table for job holding.
• Firm hinged clamp to reduce possibility of distortion.

• Simple,Easy,Flexible,Economical & Light Weight.
• Can swivel 150° and lift sheets vertically and horizontally.
• Can lift non-homogenous parts with unbalanced weight and loads.
• Optimum flux density - effectively lifts thick/thin sheets.
• Magnets always remain ON.
• Cam mechanism jack up lever releases the job easily with the help of long handle.

• Low height
• Made from high quality steel.
• An angle can be set to within ?? 5 seconds of degree.
• Firm Hinge Clamps reduce possibility of distortion.
• Tapped hole in top, sides end, facilitate clamping.

• Efficient performance
• Longer functional life
• Rugged in construction

• Fulfill the high precision and efficiency required by machining center, CNC milling machines.
• With superb work efficiency, stable magnetic force and 5-axis processing applicable, normally time saving almost 70% ∼80%.
• Square poles combination with density and powerful force, high precision workpieces can be achieved while inner stress during processing.
• Powerful attraction can hold least thickness 2mm above for processing.
• Environmental safe and simple operation.

• EPM CHUCK is designed in such a way that it is very useful for Horizontal machining centers. It is also useful in conventional machining for Horizontal milling operation.
• As Electro Permanent Magnetic (EPM) Principle is used
• Continues Electrically is not required.
• Easily intergrated with pallet clamping
• Manufactured as per customer requirement

• ELECTROPERM HEAVY DUTY CHUCK (70 x 70) Quard Pole
• Work holding device for conventional & CNC milling m/c.
• COLD DEVICE as it doesn't require power continuously except for short period of activation & deactivation.
• Suitable for light milling i.e. 3-6 mm depth of cut at recommended speed & feed.
• Maximum material removal is possible.
• Economical for operation & maintenance.
• No accidents due to power failure.
• Slippering force is 2.5 - 3.5 Kg/cm².
• Vertical Lifting Force is 40 - 45 Kg/cm².
• Variable supply unit to vary power which helps in alignment of jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test,
• Electrical & Demagnetizing tests.
• Good quality & standard electrical accessories.

• Suitable for drilling & light machining
• Easy to operate
• Time saving as mechanical clamps are avoided
• Economical for operation & maintenance
• Powerful holding with the magnet
• Vertical lifting force is 35 to 40 kg per cm sq
• Fast setups of bar stock or round steel
• Powerful magnetic base, ON-OFF switch

• Strong Magnetic field to hold the work piece strongly.
• Used for holding on surface grinding machine.
• Chuck is tested for earth terminal test,waterproof test,temperature rise test,& demagnetizing  test.
• Provided with variable supply to vary power,which helps in aligning & removing of warp ages of thin jobs.
• Work holding device for surface grinding machines, each pole is having seperate coil, such as very strong & even magnetic flux is generated. 
• These Electro-Magnetic chucks are designed for strong electro magnetic field to hold the work piece secuely.
• Minimum mechanical deformation with solid one-piece housing uniformmagnetic force distribution with specially developed rigid top plate.
• Minimum power consumption.
• Full magnetic surface offering easy operation.
• Versatile clamping , excellent holding on a broad range of work piece sizes.
• possibility to combine several chucks for a large uninterrupted surface.
• Low profile for more wheel head clearance normal input voltage 110 VDC.
• Back and end work stop rail.
• Minimum twice the length of chuck power cable.

• Useful in shop floor for stacking of sheets size up to 1000 x 2000 mm
• Loading/ unloading of plates from planners, boring, milling machine.
• Most suitable near flame cutting machines

Features:
 

• Simple, easy, flexible, economical and light weight
• Can swivel 150  and lift sheets vertically and horizontally
• Can lift non homogeneous parts with unbalanced weight and loads
• Optimum flux density – effectively lifts thick/ thin sheets.
• Magnets always remain ON.
• Cam mechanism jack up lever releases the job easily with the help of long handle.

Specifications:

• Durable
• Reduces the cost
• Reliable performance

• These brand permanent magnetic lifters are compact in design. Our designs are more parallel to international products. The self-contained permanent magnet maintains its holding power indefinitely. Magnets used in our lifters are of high standards.
• These lifters does not require any external electric supply so no hanging wires and
• switches. The field of the permanent magnet is controlled by the "ON - OFF" position of the safety handle. There is no danger of accident due to failure of electric supply.
• Lifting magnets require good surface conditions to achieve maximum lifting. Ground or machined surfaces are ideal, but a good clean surface or a forging or casting is acceptable provided sufficient flat area is available for magnet contact with work piece.
• Recommended lifting capacity is for flat, ground clean ferrous plates de-rated by a factor of three. The safety factor is required due to such variables as surface condition, contact area, alloy content and material thickness and may need to be increased if conditions are particularly adverse.
• Every permanent magnetic lifter comes along with third party inspection report.
• Higher lifting capacity is available on request.
• Factor of safety is 1: 3
• Always ensure the cleanliness of the contact surface of both lifter and the material to be lifted.
• No electrical supply is needed due to permanent magnets.
• wen supply lifting Magnet, Scrap lifting Magnet, Heavy Duty Industrial Permanent Magnetic Lifter, Permanent Magnetic Lifter (PML), 600 Kg Permanent Magnetic Lifter,  500 Kg Permanent Magnetic Lifter, 1000 Kg Permanent Magnetic Lifter, Powerful Permanent Magnetic Lifter, etc

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• Accuracy for Squareness, Flatness & Parallelism 0.010 up
• to 150W & 0.020 up to 200W.
• Grade A- made from alloy steel material & Hardness is 60±2 Rc.
• Grade B - made from hard cast iron & scrapped
• Four different 90⁰ V opening to suit various sizes.
• Supplied in perfect matched pair.
• Also available to suit your specifications.

• Strong quality
• Best size
• Superior varieties

• Mini and Economic Type
• Main axle is made of aluminium
• Mechanic Structure, no oil problem
• Fine-tuning structure on base, easy to adjust

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• Accuracy for Flatness, Squareness and Parallelism within 0.005mm upto 150mmL & 0.010mm for 200mm L of "V"block
• The Bigger V angle & bottom holding surface are equipped with hardened strips for wear resistance.
• Uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & V face.
• Easy ON- OFF facility.
• 120⁰ " V " angle also available.

• Used for clamping of round and flat jobs during EDM operation, Light machining, Grinding or Drilling & Inspection
• Accuracy for Flatness, Sqareness & Parallelism within 0.005mm. 120L & 0.010mm. upto
• 170L of 'v' Block
• Uniform magnetic pull
• Three magnetic surfaces top, Bottom & V faces
• Hardness of V face is 60±2 Rc.

• Used for Grinding, Light Milling, Drilling & Inspection of Round & square jobs,
• Accuracy for Parallelism is within ±0.005mm
• Provided with ON-OFF switch except for 1" block
• Supplied in perfect matched pair. Harden Strips provided in hard pair

• Durable
• High Physical Strength
• High Mechanical Strength

• Inspection area contains carbide tips so that, we get better life in the big ‘V’.
• Efficiency of inspection increases considerably due to carbide in the Big ‘V’ over normal H.S.S ‘V’ blocks.
• Accuracy is maintained for a longer period of time.